home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Almathera Ten Pack 2: CDPD 1
/
Almathera Ten on Ten - Disc 2: CDPD 1.iso
/
pd
/
076-100
/
093
/
dme
/
dme.doc
< prev
next >
Wrap
Text File
|
1995-03-13
|
25KB
|
635 lines
DOC.TXT
DME V1.27 (C)CopyRight 1987, Matthew Dillon. All Rights Reserved. This
software may be distributed for non-profit only. This software is
NOT shareware.
Matthew Dillon contribute if you wish.
891 Regal Rd
Berkeley, Ca. 94708
Source is available on request or by anonymous FTP. Source requests
can ONLY be made via electronic mail to the following address:
USENET ...!ihnp4!ucbvax!dillon
ARPANET dillon@ucbvax.berkeley.edu
---------------------------------------------------------------------------
I Overview
II Keymapping key and mouse mapping
III Command Sequences DME commands
IV File Particulars notes on loading and saving files
V Workbench Support
VI Revision Summary revision numbering, changes made, etc...
VII Compiling compiling instructions
I
OVERVIEW
See REVISIONS section for revisions. DME is a WYSIWYG editor designed
mainly for programmers. Although it is not a word processor, it does
include many word processing features such as Word-Wrap and automatic
paragraph formatting. Here is a quick 'features' list:
-control language based on a rich command set accessed manually
or via arbitrary mapping of keys. (Every key may be mapped to 16
different things)
-fast visual response (it scrolls quickly)
-title-line statistics showing your current position in the file,
file name, whether the file has been modified or not, etc...
-Multiple Windows, ability to iconify windows
-Word Wrap and automatic paragraph formatting.
-ability to map any KEY or MOUSE BUTTON combination.
DME has been designed to allow easy expansion, and I intend to make many
future improvments. It has not been designed for user friendliness, but is
straight forward if you read this document fully.
DME can take any number of arguments. Any argument without a '-' in front
of it is considered to be a file. Normally, DME will automatically SOURCE
two script file, S:.EDRC, and the .EDRC in your current directory. These
files do not have to exist. These script files usually contain mappings and
do things like turn on word wrap and set the right margin.
FLAGS:
-ffilename -source this script file instead of .EDRC
-b -normally when multiple files are specified,
DME opens them with small windows. This opens
them with normal sized windows.
-tN -Open the window on scan line N
-lN -Open the window offset N scan columns
-wN -Make the window N pixels wide
-hN -Make the window N pixels high
II
KEYMAPPING
MOUSE BUTTONS:
The mouse buttons and combinations thereof may now be mapped. The
default mappings for the mouse buttons are as follows:
Left-button: Move cursor to current mouse position
Right-button: Iconify window
Left-button held down while moving mouse tracks the cursor
The iconification features:
-Remembers original window size and placement
-Remembers placement of iconified window when you re-iconify later.
Currently, you will crash the machine if you run out of memory and DME
is unable to open the icon window or original window, so be careful.
see below for mapping the mouse buttons and mouse movement.
KEYBOARD:
The rest of the Functional interface for DME is based on key/mouse mappings
and a rich command set. Unlike other text editors, any non-qualifier key
in DME may have any meaning whatsoever. It just so happens that the
default keymappings assign such things as the `return' key to the RETURN
function, the `up' key to the UP function, etc... Keys are named by their
keycap labels with the following exceptions:
the name for Back-Space is BS
the name for numeric keypad keys are prepended with an NK, except for
the Enter key which is named 'ENTER'.
The four cursor control keys are labeled UP, DOWN, LEFT, and RIGHT
The three mouse buttons are labeled RMB, MMB, and LMB.
*NOTE* the normal Amiga mouse has only two buttons, the Left and the Right
mouse buttons (LMB, RMB). A properly installed three-button mouse is
also supported.
*NOTE* You must type commands in lower-case, except for text, which can be
either lower or upper case, and for upper-case alpha keys when specifying
keymaps (i.e. A and s-a are the same key). The exception is the AMIGA
qualifier key, which uses 'A' instead of 'a'(Alt).
Each key may be qualified with any combination of CTRL, ALT, SHIFT, AMIGA,
or any of the MOUSE buttons. With 6 qualifiers (7 if your mouse has a
middle button), you can assign up to 64 (128) different maps to each
physical key on the keyboard.
NOTE: The CAPS-LOCK, when lit, is equivalent to SHIFT only for Alpha keys.
NOTE: The AMIGA-ALT (aA) combination isn't very usable since Intuition uses
the sequence to duplicate a Mouse SELECT. Other AMIGA sequences are used
by intuition for mouse movement and other things. Some other qualifier
combinations may not be usable due to other special sequences.
***EXAMPLES:***
tab tab
a-a ALT a
A-a AMIGA a
sA-a SHIFT AMIGA a
s-tab SHIFT tab
c-tab CTRL tab
ac-? ALT-CTRL ?
s-f5 SHIFT F5
nk0 Numeric Keypad 0
cs-nk0 CTRL SHIFT Numeric Keypad 0
L-lmb Left Mouse button pressed
L-mmove Mouse moved while left mouse button held down
LR-lmb left mouse button hit while right mouse button held down
***************
MAPPING MOUSE BUTTONS
Mouse buttons serve both as QUALIFIERS and as KEYS. Thus, you can map
both normal keystrokes which require a mouse button to be held down:
map L-a ``left button and an a''
as well as the mouse keys themselves:
map L-lmb ``left mouse key''
note that you had to specify the left mouse button down qualifier L as
well as the left mouse button LMB.
If you map the left mouse button, and also map a sequence such as left
mouse button + a:
map L-lmb tomouse
map L-a ``hello''
Note that the first mapping will always get executed even if you
intended L-a (that is, BOTH mappings would get executed). In order
to avoid confusion you might want to UNMAP the system default mapping
for the right mouse button (mapped to ICONIFY) if you wish to apply
combinations to the right mouse button.
MOUSE MOVEMENT is mapped with one or more mouse qualifiers (L, R, M),
plus 'MMOVE' for the key. That is:
map LR-mmove ``moving the mouse with both buttons held down''
DEFAULT KEYMAP:
All Printable Ascii keys mapped to their ascii equivalent
BS, DEL, UP, DOWN, LEFT, RIGHT, TAB, S-TAB, ENTER mapped properly
`s- ' Shift Space is Mapped to space
backspace Back Space
tab Tab
s-tab Back tab
enter the RETURN command
return `return insline up firstnb down'
esc Escape into command mode
del Delete character
s-del Delete line
c-del Remove to end of line
up cursor up
down cursor down
left cursor left
right cursor right
s-up top of text
s-down bottom of text
s-left first column
s-right last column (one past the last non-blank on a line)
c-up page up
c-down page down
c-q Quit
c-w TOGGLE WORD WRAP MODE
f1 Prompts for file to insert
f2 Prompts for new file to replace current text with
f3 Prompts for new file to place into new window
f7 Prompts for filename to save marked block to
f8 Saves current text and then does an 'f2'
f9 Saves current text, but does not quit
f10 Saves current text and quits.
c-r Word Right
c-l Word Left
c-i insert mode on
c-o insert mode off
c-/ Prompts for search pattern
c-p search previous occurance
c-n search next occurance
c-s `split first down' ... fancy split line
c-u Unblock a block
c-b Mark start/end of a block
a-s SOURCE a block of text as if it were a script file
sa-s SOURCE the current line of text as if it were a script file
a-d delete block
a-c copy block
a-m move block
c-f reformat paragraph
c-g Prompts for line to GOTO to.
c-j join next line to this line.
L-lmb move cursor to mouse position (tomouse)
L-mmove move cursor to mouse position (tomouse)
R-rmb iconify window
help `newwindow newfile s:DME.DOC escimm `find ''
III
COMMAND SEQUENCES
DME has a rich command set which allows you to embed commands within
commands, or specify multiple commands in a row. A command consists of a
KEYWORD followed by a FIXED number of arguments (0, 1, 2...). The argument
delimeter in DME is a SPACE. Therefore, to embed strings containing spaces
as a single argument, you must surround the string with `string'
(backquote-string-quote). TEXT to be written as if typed is also specified
via a string in backquote-quotes. For example:
right right `hello' right right `hello' enter down
map f4 `right right' map f5 `left left'
map f4 ``hello''
Reiterating (because this is important!)... If a command expects ONE
argument, then it really does expect a single argument, and any remaining
arguments are thought to be the next command... so:
map f4 right
-right is only one word, so no need
for `'.
map f4 `right right'
-we want to map f4 to two rights... we
need the `' or the second right will
not be part of the map.
map c-del `repeat cright del'
-this is already implimented as REMEOL,
but shown here for clarity.
Some arguments will eventually be fed through the command interpreter more
than once. The MAP command is a good example. When you execute a MAP
command, the first run through the command interpreter installs the map
string minus a set of quotes. So, if you want to specify text, you must
enclose the text in two sets of ``text'' because the map string gets passed
through the command interpreter again when you hit the mapped key. Here
are some more complex examples:
map f4 `right right `hello' left left' *RIGHT*
map f4 right right hello left left *WRONG*
map f4 `map f4 ``hello'''
-the first time you hit F4, it's command
is to re-map itself to the TEXT `hello'.
(gads!).
map c-i `repeat tr `` '''
-example of how to embed a space in a
map and repeat (goes through command
interpreter three times!).
An easy way to fool around executing commands or making maps is either to
use the ESC key (which enters command mode), or a-S (alt-shift-s), which
EXECUTES the current DME line that the cursor is on.... so you can use DME
to edit and test your new keymappings.
!!!!!!!!!! NOTE NOTE NOTE NOTE NOTE !!!!!!!!!!!!!! You must type commands
in LOWER case. They are in upper case here for visibility.
COMMAND LIST
`text' -enter text as if typed.
key -execute a keymap as a macro (example: c-a)
BACK -same as BS
BACKTAB -backward tab
BCOPY -copy block before cursor line
BDELETE -delete the block
BLOCK -Set start or end of block
BMOVE -move block before cursor line
BOTTOM -Move to Bottom of File
BS -backspace, (delete char to left of cursor)
BSAVE file -save the block to a file
BSOURCE -source current text block as if it were a script file
DEL -delete, (deletes char under cursor)
DELINE -delete line
DOWN -cursor down
DOWNADD -cursor down. If at bottom of text, add a line.
ESC -toggle manual command entry mode
ESCIMM arg -go into command entry mode prompting with a
predefined string.
EXECUTE comm -Execute a CLI command
FIND string -SET the search pattern and do a NEXT
FINDR s1 s2 -Set find and replace patterns and do one find/rep.
FINDSTR string -SET the search string pattern
FIRST -move to column 1
FIRSTNB -Move to first non-blank in line.
GOTO BLOCK -Goto the beginning of the marked block.
GOTO START -same as GOTO BLOCK. undefined if no block
GOTO END -goes to the END of the marked block. undef. if no blk.
GOTO [+/-]N -Goto an absolute or relative line number
HEIGHT N -set height in pixels for any new window
ICONIFY -iconify the window
IF cnd act -IF/WHILE/IFELSE.. SEE BELOW
IFELSE cnd ifact elseact
INSERTMODE what -set INSERTMODE. what = on, off, or toggle
INSFILE name -insert a file into the current text.
INSLINE -insert line
JOIN -join next line to line at cursor
LAST -move one beyond the last non-space in a line.
LEFT -cursor left
LEFTEDGE N -set leftedge in pixels for any new window
MAP key map -map a key to a keymap
MARGIN N -set WordWrap and paragraph formatting margin
(related to WORDWRAP and REFORMAT)
NEWFILE name -replace current text with new file
NEWWINDOW -open newwindow
NEXT -find next occurance of search pattern
NEXTR -find next occurance and replace
PAGEDOWN -pagedown a partial page (see PAGESET)
PAGESET n -n PERCENT (0 to 100). page step size relative to the
current number of rows in the window.
PAGEUP -pageup a partial page (see PAGESET)
PREV -find previous occurance of search pattern
PREVR -find previous occurance and replace
QUIT -quit
REFORMAT -reformat paragraph using the margin.
REMEOL -Remove text under and beyond the cursor.
REPEAT cnt comm -SEE BELOW
REPSTR string -SET the replace string pattern
RESETTOGGLE N -clear toggle array entry N(0..31)
RESIZE cols rows-Resize current window. E.G: `resize 70 23'
RETURN -same as `FIRST DOWNADD'
RIGHT -cursor right
SAVEAS file -save current text under a different name (title
line name does not change)
SAVEMAP file -save user keymappings
SAVEOLD -save current text under current name
SAVESMAP file -save all keymappings, including system keymaps
SAVETABS on/off -Optimize file saves by crunching spaces to tabs.
The default is OFF.
SCREENBOTTOM -Move cursor to the bottom of the screen.
SCREENTOP -Move cursor to the top of the screen
SETTOGGLE N -set toggle array entry N (0..255)
SOURCE file -source a script file
SPLIT -Split line at cursor
TAB -forward tab
TABSTOP N -Set tab stops every N. does not effect text load
TLATE [+/-]N -translate character by +N or -N, or set character
to exactly N if no + or -. (e.g. TLATE +65 TLATE 3)
TOGGLE N -flip toggle array entry N (0..255) (See IF)
TOMOUSE -moves cursor to mouse position
TOP -Move to Top of File
TOPEDGE N -set topedge in pixels for any new window
UNBLOCK -clear the block markers for the current window
UNMAP key -unmap a key
UP -cursor up
WHILE cnd act -(see below)
WIDTH N -set width in pixels for any new window
WLEFT -move to beginning of previous word. If in the
middle of a word, move to beginning of current word.
WORDWRAP on/off/toggle
-Word Wrap mode (related to MARGIN)
WRIGHT -move to beginning of next word
-------------------------------------------------------------------
Command which cause a command line to abort (e.g. in repeat, while):
FIND[R]/NEXT[R]/PREV[R] when the string is not found. NEXT stops at
the end of the file, PREV stops at the beginning.
DOWN,LEFT,RIGHT,UP when the operation cannot be done.
-------------------------------------------------------------------
REPEAT N arg -Repeat `arg' N times. Apart from being a number, N
can also be one of:
line Current line # (lines begin at 1)
lbot #lines to the bottom, including current line
cleft column # (cols begin at 0)
cright #chars to eol, including current char under cursor
tr #char positions to next tab
tl #char positions to next back tab
Certain commands can abort a REPEAT loop.
Specifically, any FIND[R], NEXT[R], or PREV[R] in which
the search string is NOT found will abort a REPEAT.
Most operations which can go out of bounds, such as
UP, LEFT, RIGHT, DOWN, also abort a repeat.
Specifying -1 as N causes REPEAT to go on forever
(well, actually, 0xFFFFFFFF times) or until an abort.
To abort an accidentel infinite loop, you must use the
CLI BREAK command.
IF [!]condition arg
WHILE [!]condition arg
IFELSE [!]condition arg else arg
If the specified condition is true, execute the argument. For
WHILE, the argument is executed until the condition is false
(be careful!).
the optional '!' inverts the logic.
Conditions:
# if toggle entry # is SET. there are 256 toggles (0..255)
t if On line 1
b if On last line
l if At column 0
r if At end of line (spaces below and beyond)
m if Text has been modified
i if in insert mode
x[<=>]# if column position (starts at 1) is (any OR combo of
<, =, or >) than some number. Example: x<=20
y[<=>]# if Line number (starts at 1) is (same as for x)
cl character under cursor is lower case alpha
cu character under cursor is upper case alpha
ca character under cursor is alpha-numeric
cn character under cursor is numeric
c[<=>]# character under cursor is ascii code # (# in decimal)
optional conditionals as in 'x' and 'y'.
cb cursor within a block
Example: simulating an insert mode toggle: ALT-i (not CTL-i)
map a-i `ifelse 0 `toggle 0 insertmode OFF' `toggle 0 insertmode ON''
Example: while lower case, map to upper case and move right.
map c-U `while cl `tlate -32 right''
if c<32 ``char under cursor is smaller than 32''
if c<>32 ``char under cursor is not equal to 32''
while !b down
WARNING: It is possible to get into infinite loops with REPEAT and
WHILE. Currently, BREAK is *not* handled by the open
window, but by whatever executed DME. That is, you must
either Ctl-C from your CLI, or send a BREAK to the DME
process. I hope to fix this soon.
IV
FILE PARTICULARS
No Matter what you set internal tabs to, tabs in disk files will be 8.
This allows you to use your favorite tabs stops (mine are 4) and still
have your disk files compatible with TYPE, a printer, etc... DME by
default doesn't bother to optimize when writing out files and simply uses
spaces. If you `SAVETABS on' before saving (or in your S:.EDRC, etc...),
DME will attempt to optimize the file by placing TABS in appropriate
places. DME will not place any TABS after the first single, back, or
double quote is encountered in a line. If this does not cover every
situation in your particular application that you want to be *sure* no tabs
will occur in sensitive sections, then you should not use `SAVETABS on'.
It should be noted that since DME removes spaces at the end of the line,
editing UUENCODED ascii files will not work for uuencoded lines which end
with a space. The nominal fix is to add an extra character after each
uuencoded line (anything), which is ignored by the UUDECODE program.
The command to save the current document under the default name is SAVEOLD,
*not* SAVE. SAVE is not a valid command. This is to prevent people who
have not read the documentation from assuming 'save' takes an argument (and
screwing up their work). SAVEOLD does NOT take an argument, SAVEAS does.
SAVEOLD/SAVEAS does not automatically backup the destination file. If you
are working in an enviroment where you are worried about ensuring a viable
copy can be recovered if your Amiga crashes in the middle of the save, you
can write a macro to save the file into two places. Usually, people backup
their working disks so this is not neccesary.
Workbench Support: If DME is run from the workbench, it will automatically
construct an icon file when you save a document. If run from a CLI, no
icon file is generated.
V
WORKBENCH SUPPORT
DME V1.26 and beyond support the workbench in the following way: (1) you
can click on the DME icon to bring up DME with ram:unnamed. (2) you can
select one or more standard ascii documents which have DME as the default
tool. If DME has no knowlege of a text icon, it uses its own. Command
line arguments are passed to DME via the tooltypes entries for DME's
application icon or via individual document icons. The following format is
used:
ARG=flag
See the OVERVIEW section for allowed flags. Only one argument per line
is allowed (sorry). The tooltypes for the application icon are
processed first, then the tooltypes for each document icon are
processed before each file is loaded.
ARG= -t10
ARG= -l10
VI
REVISION SUMMARY
V1.27 RELEASE
-macros run about 20% faster due to hashing of the command table
-Maximum # of toggles raised to 256 (see IF/WHILE)
-small fixes to the code (nothing major)
-child windows inherit tab stops, insert mode, and wordwrap mode
-MOUSE BUTTONS AND MOVEMENT CAN NOW BE MAPPED
-New Commands: ICONIFY (used to be hardwired. Is now a command)
-Extended Commands: GOTO (GOTO END)
V1.26 Beta, minimal Release
-Workbench support
-New Command: EXECUTE
V1.25 RELEASE
-BSAVE does NOT UNBLOCK after saving (switch in functionality yet again)
-various bugs fixed (IF, tabs on file save)
-New Commands: MARGIN, REFORMAT, WORDWRAP, RESIZE,
TOPEDGE, LEFTEDGE, WIDTH, HEIGHT
-Command line options added for setting the window size and an optional
specified script file (when specified, local .EDRC not sourced).
-Enhanced Commands: IF ..more control with conditions, addition of
a couple more specifications.
JOIN .. functionality slightly changed
-keymaps may now be used as macros in other commands. (macros)
-New keymaps added to the default set.
-Mouse movement cleaned up a little.
V1.24 Internal
V1.23 RELEASE
-S:.EDRC now sourced instead of C:.EDRC
-User keymappings now work in COMMAND mode (when you hit ESC).
-You can now map the Amiga keys ('A' for Amiga, since 'a' is alt).
-Enhanced Commands: IF/IFELSE/WHILE (optional '!' in front of cond)
new condition 'cb' 'character in selected block'
GOTO (can now say `goto block')
-NewCommands: PAGESET SAVETABS
-Writing TABS (always 8) out to disk to save space now supported.
V1.22 RELEASE (BUF FIXES FROM 1.20)
-'newfile' fixed
V1.21 RELEASE (BUG FIXES FROM 1.20)
-iconify and window handling fixed
-left mouse button now tracks the mouse.
V1.20 RELEASE
-bug fixes: bsave now unmarks the block, bdelete now sets 'modified' flag.
(other small fixes).
-enhancements: overwrite mode status indicator, find, find-replace now
completely implemented (yahhoo!!!)
-changed commands: FIND NEXT PREV: no longer loop back to the top of
file or top->bottom in the case of PREV. DELINE will now delete
text on the line if there is only one line of text.
-enhanced commands: GOTO REPEAT
-new commands: SAVEMAP SAVESMAP TOGGLE SETTOGGLE RESETTOGGLE TLATE
IF IFELSE WHILE BSOURCE
FINDSTR REPSTR FINDR NEXTR PREVR
NEWWINDOW
-new keymappings: (see a-s, a-S, f3)
-window iconification with mouse menu button.
V1.12 RELEASE
-cursor is now pen #3 rather than #1.
-changeover to AZTEC C, smaller executable.
-now maps shift space to a space.
-new commands: REMEOL, WLEFT, WRIGHT
-display bug fixes (SPLIT)
-FIND/PREV/NEXT will now abort a REPEAT if string not found.
V1.11 RELEASE NOTES
-Bug fixes (mainly graphical mistakes).
-User keymappings are disabled in command mode (so you can unmap
single ascii characters you may have mapped).
-Illegal key combinations no longer give garbage (e.g. ALT-CURSOR-DOWN)
you can, of course, still map them to anything you wish.
-Save now checks for error conditions on write.
-Uses Default Console Keymap (i.e. no longer assumes USA)... but there
*is* some stangeness.
V1.00 RELEASE NOTES
-has find, but no replace function
-marked blocks are not highlighted
-assumes USA keyboard (fixed 1.11)
-disk files written out use spaces instead of tabs&spaces
-No scroll bar yet.
VII
COMPILING
DME now compiles only under AZTEC. You must compile with the 32 bit int
option, but may use the small code/data model. You must use V3.00 or above
of MY.LIB (MY[L]32.LIB, dated no sooner than MARCH 1987). I use a
precompiled symbol file containing ALL the amiga includes (but not any
aztec standard includes). Look at the MAKEFILE for further information